AMX NXB-CCG-K Informations techniques télécharger pdf (Page 18)

Lutron® integration protocol

HELP Command Formats

Example HELP Messages

Operation Command String

Query: #HELP, Command Name, Action Number

What are all the supported Integration Commands? ?HELP<CR><LF>

What actions are available for #OUTPUT? ?HELP,#OUTPUT<CR><LF>

How is “Raise” used for #OUTPUT? ?HELP,#OUTPUT,2<CR><LF>

Response: ~HELP, Help Information

The list of all Integration Commands. #OUTPUT,?OUTPUT,#DEVICE,?DEVICE,#AREA,

?AREA,#TIMECLOCK,?TIMECLOCK,#SYSTEM,

?SYSTEM,#MONITORING,?MONITORING,

The help information for the #OUTPUT command. ~HELP, #OUTPUT requires action<1–6><CR><LF>

1 = Set Level / Position

2 = Start Raising

3 = Start Lowering

4 = Stop Raising / Lowering

6 = Pulse

USAGE: #OUTPUT, <ID>, <action>,<CR><LF>

The help information for the “Raise” action (#OUTPUT). ~HELP, #OUTPUT, <action=2> start raising

output level<CR><LF>

USAGE: #OUTPUT, <ID>, <action=2><CR><LF>

Operation

Command

?HELP, Command Name

, Action Number

Integrator’s Reference (continued)

HELP

: Command Summary

HELP Command for a speciﬁc Command Name provides command-name speciﬁc usage

information.

NOTES

1. HELP not supported in QS Standalone.

2. The “Command Name” parameter is optional. If not entered, a list of all the supported Integration Commands will be

printed. If a supported command name is entered, the corresponding actions will be listed.

3. The “Action” parameter is optional. When a valid action number is entered (i.e. it is supported by the corresponding

“Command Name”), the help information for that particular action will be displayed.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 143 144

Pas de commentaire

AMX NXB-CCG-K Informations techniques Page 18