AMX NXB-CCG-K Informations techniques télécharger pdf (Page 119)

119

Lutron® integration protocol

Sivoia® QS Venetian Blind (continued)

OUTPUT Commands

OUTPUT Command Format

OUTPUT Command-speciﬁc ﬁelds

Action Numbers and Parameters:

Action Action Number Parameters

Set (#) or Get (?)

Venetian lift level only

1 Lift Level

= 0 –100 or 0.00 –100.00

Fade

in: SS.ss

, SS, MM:SS, or HH:MM:SS

Delay

in: SS.ss

, SS, MM:SS, or HH:MM:SS

Set (#) or Get (?)

Venetian tilt level only

9 Tilt Level

= 0 –100 or 0.00 –100.00

Fade

in: SS.ss

, SS, MM:SS, or HH:MM:SS

Delay

in: SS.ss

, SS, MM:SS, or HH:MM:SS

Set (#) or Get (?)

Venetian lift & tilt level

10 Lift Level

= 0 –100 or 0.00 –100.00

Tilt Level

= 0 –100 or 0.00 –100.00

Fade

in: SS.ss

, SS, MM:SS, or HH:MM:SS

Delay

in: SS.ss

, SS, MM:SS, or HH:MM:SS

Start raising Venetian tilt 11 None

Start lowering Venetian tilt 12 None

Stop Venetian tilt 13 None

Start raising Venetian lift 14 None

Start lowering Venetian lift 15 None

Stop Venetian lift

16 None

NOTES

Fade is not available for blinds since they move at a constant rate. The parameter must be entered but is ignored.

3. Fractional seconds “SS.ss” will be rounded down to the nearest quarter second. For example, if a delay time is speciﬁed

as 1.45 seconds, a value of 1.25 seconds will be used.

4. The Delay time is optional. When not used, the system will use a zero-second delay. The minimum delay time is

0.25seconds. The maximum delay time is 4 hours. Not supported in QS Standalone.

Use “OUTPUT Command-speciﬁc ﬁelds” tables

to complete these command ﬁelds.

Operation

Command

Integration ID (example)

#OUTPUT, 1, Action Number, Parameters

100% 75% 50% 25% 0%

Lift

Tilt

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 143 144

Commentaires sur ces manuels

Pas de commentaire

AMX NXB-CCG-K Informations techniques Page 119

Commentaires sur ces manuels

Produits connexes et manuels pour Passerelles/contrôleurs AMX NXB-CCG-K