AMX DXLink Multi-Format SMF-D Manuel d'instructions Page 76
- Page / 137
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
NetLinx Programming – DXLink Fiber TXs/RXs
76
Instruction Manual – DXLink™ Fiber Transmitters and Receivers, Duplex
IR SEND_COMMANDs
On the DXLink Fiber Transmitters and Receivers, IR CHANNELS and SEND_COMMANDs are sent to Port 3
(IR output).
IR CHANNELs
IR SEND_COMMANDs
Audio SEND_COMMANDs (Transmitters), continued
AUDIN_FORMAT
Selects the audio input source that will
be embedded on the HDMI signal
through the Transmitter.
Note: When the Transmitter is set to
route digital video (input 7), you can
select from the HDMI, SPDIF, or
ANALOG audio inputs. When the
Transmitter is set to route analog video
(input 8), you can only select the
SPDIF or ANALOG audio input (see
the VI<input>O<output> command
on page 71.
Syntax:
SEND_COMMAND <DEV>,"'AUDIN_FORMAT-<format>'"
Valid responses:
format = HDMI, SPDIF, ANALOG
Example:
SEND_COMMAND dvTX,"'AUDIN_FORMAT-ANALOG'"
Important: The order of precedence (HDMI embedded audio, S/PDIF,
analog) can be overridden with this command; however, you must
first send
AUDIN_FORMAT_AUTO-DISABLE to disable the auto format function, or the
audio format will automatically switch back anytime the order of precedence is
violated.
Channel Function
1-255 Generate the IR or serial command assigned to that channel.
IR SEND_COMMANDs (Transmitters and Receivers)
Command Description
CAROFF
Disable the IR carrier signal until a
'CARON' Send Command is received.
Syntax:
SEND_COMMAND <DEV>,"'CAROFF'"
Example:
SEND_COMMAND IR_1,"'CAROFF'"
Stops transmitting IR carrier signals to the IR port.
CARON
Enable the IR carrier signals (default).
Syntax:
SEND_COMMAND <DEV>,"'CARON'"
Example:
SEND_COMMAND IR_1,"'CARON'"
Starts transmitting IR carrier signals to the IR port.
AUDIN_FOR
- Instruction Manual 1
- Contents 3
- ESD Warning 6
- Copyright Notice 9
- Liability Notice 9
- US FCC Notice 9
- Lithium Batteries Notice 9
- Trademark Notices 9
- Apache License, Version 2.0 10
- Warnings and Cautions 11
- Applicability Notice 12
- Product Notes 13
- Product Compatibility 15
- Common Applications 17
- Power Jack 18
- Video In Connector 18
- Overview DXLink Fiber, Duplex 19
- Fiber Optic Transceiver 20
- Common Features/Functionality 23
- DXLink Fiber Receiver, Duplex 24
- HID Devices and Windows 8 24
- 4. Click OK 25
- DXLink Fiber Specifications 28
- qualified): 1 per unit 29
- HDMI Specifications 30
- Analog Video Specifications 32
- Local Audio Specifications 33
- Installation and Setup 34
- Setup Information 35
- Example 36
- Endpoint/ 36
- Bidirectional 36
- Example B 37
- Example C 37
- Example A 37
- DIP Switch Location 38
- Setting DIP Switch #2 39
- Setting DIP Switch #4 39
- V Style mounting hardware 40
- Audio Type Precedence 42
- ICS LAN 10/100 LEDs 42
- ID Pushbutton Functions 49
- To set the Scaling Mode: 50
- Bypass Mode 50
- Auto Mode 50
- Manual Mode 50
- Persistence of Scaling Mode 51
- Network Configuration 54
- TCP/IP Address Configuration 55
- Factory Default Parameters 56
- Device IDs 57
- Using the ID Pushbutton 57
- Factory Parameters* 59
- IRL File Transfers 61
- Transferring IRL Files 63
- Additional Documentation 65
- Additional IRL Information 65
- Device Numbering and Ports 66
- VIDOUT_SCALE 68
- Scaling Modes 68
- VIDOUT_RES_REF 68
- SEND_COMMAND 68
- VI<input>O 71
- <output> 71
- VIDIN_EDID 73
- IR CHANNELs 76
- IR SEND_COMMANDs 76
- AUDIN_FOR 76
- CH SEND_COMMAND 77
- XCH SEND_COMMAND 78
- USB SEND-COMMANDs (Receiver) 82
- PERSISTAV 84
- SEND_STRING Escape Sequences 85
- Troubleshooting 86
- Network Setup Issues 87
- DXLink Fiber Troubleshooting 87
- Technical Support 88
- Important Upgrade Information 90
- Transferring KIT Files 91
- Firmware Versions 92
- Example: 93
- Telnet Username and Password 94
- Telnet Commands (continued) 100
- Guidelines 108
- TCP vs. UDP 108
- URL vs. NDP vs. Auto 109
- Windows Client Programs 109
- Linux Telnet Client 109
- Creating a Virtual Master 112
- CONNECTION and press Enter 115
- Overview 116
- HDMI Connector Cable Pinout 116
- HD-15 Connector Cable Pinout 117
- DVI Cable Connector Pinout 118
- CEA (RGB Color Space): 123
- CVR (RGB Color Space): 124
- CVT (RGB Color Space): 125
- DMR (RGB Color Space): 126
- DMT (RGB Color Space): 126
- DXLink Fiber and EDID 130
- USER EDID 1 131
- USER_EDID_MODIFIED 131
- MIRROR OUT 1 131
- MIRROR_OUT_LOCAL 131
- AMX EDID Library 131
- Software Installation on PC 132
- DXLink Fiber Connection to PC 133
- EDID Programmer tab 133
- EDID Programmer View 134
- Read Error Message 136
- 02/28/14 137
Produits connexes et manuels pour Équipement musical supplémentaire AMX DXLink Multi-Format SMF-D
(52 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.837 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels