AMX DXLink Multi-Format SMF-D Manuel d'instructions Page 131
- Page / 137
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Appendix H – EDID Management/Programming
131
Instruction Manual – DXLink™ Fiber Transmitters and Receivers, Duplex
USER EDID 1
This EDID is empty until an EDID is programmed/uploaded by using DGX Configuration software (see page 132). It
can be programmed either through the switcher and Input board that the Transmitter is connected to or through the USB
Program port on the Transmitter. If the command is sent to load USER EDID 1 prior to any EDID being programmed,
then the previously loaded EDID will remain on the input.
USER_EDID_MODIFIED
This EDID is empty until a preferred timing is set through the SEND_COMMAND: VIDIN_PREF_EDID. For a table
listing supported input resolutions that can be made the preferred EDID timing, see page 119. This EDID modifies the
current active EDID by replacing the preferred timing with the format desired.
MIRROR OUT 1
This EDID mirrors the downstream EDID of the connected DXLink device. When connected to a DXLink Input Board,
this EDID will be the same as USER EDID 1.
MIRROR_OUT_LOCAL
This EDID is the digital EDID from the last sink attached to the local out port. This can only be applied to the HDMI
input. This EDID does not persist over a power cycle. If you wish this EDID to persist, you can load it onto the HDMI
input using the SEND_COMMAND: VIDIN_EDID-MIRROR_OUT_LOCAL, read it using DGX configuration
software from the HDMI input and then writes it back to the HDMI input. The EDID will then be saved as
USER EDID 1.
AMX EDID Library
An AMX EDID Library is available at www.amx.com (search for EDID Library). This library provides EDID files that
can be used with AMX products. A report is provided for each EDID file, which describes the EDID features in detail, in
order to assist you in selecting the most appropriate EDID for your system needs.
Check the Library to determine if one of the custom EDID files meets your needs. (The custom EDID files
are variants of base/standard EDIDs.)
DGX Configuration Software can be used to reprogram the EDID on the input port with one of the .edid files
provided in the EDID library (see page 132).
EDID Name Digital Description Analog Description
USER EDID 1 User supplied custom EDID User supplied custom EDID
EDID Name Digital Description Analog Description
USER_EDID_MODIFIED EDID containing preferred timing set by
SEND_COMMAND 'VIDIN_PREF_EDID-
<format>'
EDID containing preferred timing set by
SEND_COMMAND 'VIDIN_PREF_EDID-
<format>'
EDID Name Digital Description Analog Description
MIRROR OUT 1 Interpreted as USER EDID 1 when TX is
connected to a DXLink Fiber Input Board
Interpreted as USER EDID 1 when TX is
connected to a DXLink Fiber Input Board
EDID Name Digital Description Analog Description
MIRROR_OUT_LOCAL EDID read from sink connected to LOCAL
OUT
NA
- Instruction Manual 1
- Contents 3
- ESD Warning 6
- Copyright Notice 9
- Liability Notice 9
- US FCC Notice 9
- Lithium Batteries Notice 9
- Trademark Notices 9
- Apache License, Version 2.0 10
- Warnings and Cautions 11
- Applicability Notice 12
- Product Notes 13
- Product Compatibility 15
- Common Applications 17
- Power Jack 18
- Video In Connector 18
- Overview DXLink Fiber, Duplex 19
- Fiber Optic Transceiver 20
- Common Features/Functionality 23
- DXLink Fiber Receiver, Duplex 24
- HID Devices and Windows 8 24
- 4. Click OK 25
- DXLink Fiber Specifications 28
- qualified): 1 per unit 29
- HDMI Specifications 30
- Analog Video Specifications 32
- Local Audio Specifications 33
- Installation and Setup 34
- Setup Information 35
- Example 36
- Endpoint/ 36
- Bidirectional 36
- Example B 37
- Example C 37
- Example A 37
- DIP Switch Location 38
- Setting DIP Switch #2 39
- Setting DIP Switch #4 39
- V Style mounting hardware 40
- Audio Type Precedence 42
- ICS LAN 10/100 LEDs 42
- ID Pushbutton Functions 49
- To set the Scaling Mode: 50
- Bypass Mode 50
- Auto Mode 50
- Manual Mode 50
- Persistence of Scaling Mode 51
- Network Configuration 54
- TCP/IP Address Configuration 55
- Factory Default Parameters 56
- Device IDs 57
- Using the ID Pushbutton 57
- Factory Parameters* 59
- IRL File Transfers 61
- Transferring IRL Files 63
- Additional Documentation 65
- Additional IRL Information 65
- Device Numbering and Ports 66
- VIDOUT_SCALE 68
- Scaling Modes 68
- VIDOUT_RES_REF 68
- SEND_COMMAND 68
- VI<input>O 71
- <output> 71
- VIDIN_EDID 73
- IR CHANNELs 76
- IR SEND_COMMANDs 76
- AUDIN_FOR 76
- CH SEND_COMMAND 77
- XCH SEND_COMMAND 78
- USB SEND-COMMANDs (Receiver) 82
- PERSISTAV 84
- SEND_STRING Escape Sequences 85
- Troubleshooting 86
- Network Setup Issues 87
- DXLink Fiber Troubleshooting 87
- Technical Support 88
- Important Upgrade Information 90
- Transferring KIT Files 91
- Firmware Versions 92
- Example: 93
- Telnet Username and Password 94
- Telnet Commands (continued) 100
- Guidelines 108
- TCP vs. UDP 108
- URL vs. NDP vs. Auto 109
- Windows Client Programs 109
- Linux Telnet Client 109
- Creating a Virtual Master 112
- CONNECTION and press Enter 115
- Overview 116
- HDMI Connector Cable Pinout 116
- HD-15 Connector Cable Pinout 117
- DVI Cable Connector Pinout 118
- CEA (RGB Color Space): 123
- CVR (RGB Color Space): 124
- CVT (RGB Color Space): 125
- DMR (RGB Color Space): 126
- DMT (RGB Color Space): 126
- DXLink Fiber and EDID 130
- USER EDID 1 131
- USER_EDID_MODIFIED 131
- MIRROR OUT 1 131
- MIRROR_OUT_LOCAL 131
- AMX EDID Library 131
- Software Installation on PC 132
- DXLink Fiber Connection to PC 133
- EDID Programmer tab 133
- EDID Programmer View 134
- Read Error Message 136
- 02/28/14 137
Produits connexes et manuels pour Équipement musical supplémentaire AMX DXLink Multi-Format SMF-D
(52 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.742 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels