AMX DXLink Multi-Format SMF-D Manuel d'instructions Page 39
- Page / 137
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Installation and Setup
39
Instruction Manual – DXLink Fiber™ Transmitters and Receivers, Duplex
Setting DIP Switch #1 to Enable/Disable Access to ICS LAN 10/100 Port
The #1 Toggle is used for enabling/disabling network activity over the physical ICS LAN 10/100 port. It does not affect
network activity over the DXLink Fiber connection. (For SEND_COMMANDs used to disable/enable ICS LAN
functionality, see page 84.)
Tip: Common setup scenarios and their DIP switch settings are provided in a table on page 40.
#1 Toggle Settings
OFF (default) – When the #1 Toggle is set to OFF, network activity over the ICS LAN 10/100 port is
disabled.
ON – When the #1 Toggle is set to ON, network activity over the ICS LAN 10/100 port is enabled.
Toggle #1 Set to ON
When a Transmitter or Receiver is connected to a DXLink Fiber input or output on an Enova DGX Digital Media
Switcher, the switcher provides a network connection allowing the Transmitter or Receiver to appear in the OnLine Tree
in NetLinx Studio (#3 Toggle must be set to ON). For connecting the Transmitter or Receiver to other equipment using
the ICS LAN 10/100 port, the #1 Toggle must be set to ON.
Setting DIP Switch #2
The #2 Toggle is reserved for future functionality. Be sure that it is set to OFF.
Setting DIP Switch #3 for Network Connectivity
The #3 Toggle is used for enabling/disabling network connectivity of the DXLink Fiber Transmitter or Receiver. If
enabled it allows the Transmitter or Receiver to be configured to connect to a NetLinx Central Controller (used for
controlling the DXLink unit and allowing Ethernet traffic).
Tip: Common setup scenarios and their DIP switch settings are provided in a table on the next page.
#3 Toggle Settings
OFF (default) – When the #3 Toggle is set to OFF, the Transmitter or Receiver will not try to connect to the
network and will not acquire an IP address.
ON – When the #3 Toggle is set to ON, the Transmitter or Receiver will attempt to connect to the network via
DHCP or static IP, depending on how the unit has been set up (see page 49). The Transmitters and Receivers
will not display in NetLinx Studio and will not accept commands or queries unless the #3 Toggle is ON.
Note: After the #3 Toggle is set to ON, a network connection is established, and the NetLinx Studio screen is
refreshed, Transmitters and Receivers display in the OnLine Tree as Unbound NDP (Network Detect Proxy)
Devices. To facilitate IRL and KIT file transfers, they can be bound to the integrated NetLinx Master in the
switcher or to another NetLinx Master. A Virtual NetLinx Master can also be used for file transfers.
Setting DIP Switch #4
The #4 Toggle is reserved for future functionality. Be sure that it is set to OFF.
Caution: Because the DXLink Fiber connection carries network activity passed from the switcher, do not
connect the ICS LAN 10/100 port on the Transmitter or Receiver to the same LAN as the switcher because a
network loop will result. For information on avoiding network loops, see page 38.
- Instruction Manual 1
- Contents 3
- ESD Warning 6
- Copyright Notice 9
- Liability Notice 9
- US FCC Notice 9
- Lithium Batteries Notice 9
- Trademark Notices 9
- Apache License, Version 2.0 10
- Warnings and Cautions 11
- Applicability Notice 12
- Product Notes 13
- Product Compatibility 15
- Common Applications 17
- Power Jack 18
- Video In Connector 18
- Overview DXLink Fiber, Duplex 19
- Fiber Optic Transceiver 20
- Common Features/Functionality 23
- DXLink Fiber Receiver, Duplex 24
- HID Devices and Windows 8 24
- 4. Click OK 25
- DXLink Fiber Specifications 28
- qualified): 1 per unit 29
- HDMI Specifications 30
- Analog Video Specifications 32
- Local Audio Specifications 33
- Installation and Setup 34
- Setup Information 35
- Example 36
- Endpoint/ 36
- Bidirectional 36
- Example B 37
- Example C 37
- Example A 37
- DIP Switch Location 38
- Setting DIP Switch #2 39
- Setting DIP Switch #4 39
- V Style mounting hardware 40
- Audio Type Precedence 42
- ICS LAN 10/100 LEDs 42
- ID Pushbutton Functions 49
- To set the Scaling Mode: 50
- Bypass Mode 50
- Auto Mode 50
- Manual Mode 50
- Persistence of Scaling Mode 51
- Network Configuration 54
- TCP/IP Address Configuration 55
- Factory Default Parameters 56
- Device IDs 57
- Using the ID Pushbutton 57
- Factory Parameters* 59
- IRL File Transfers 61
- Transferring IRL Files 63
- Additional Documentation 65
- Additional IRL Information 65
- Device Numbering and Ports 66
- VIDOUT_SCALE 68
- Scaling Modes 68
- VIDOUT_RES_REF 68
- SEND_COMMAND 68
- VI<input>O 71
- <output> 71
- VIDIN_EDID 73
- IR CHANNELs 76
- IR SEND_COMMANDs 76
- AUDIN_FOR 76
- CH SEND_COMMAND 77
- XCH SEND_COMMAND 78
- USB SEND-COMMANDs (Receiver) 82
- PERSISTAV 84
- SEND_STRING Escape Sequences 85
- Troubleshooting 86
- Network Setup Issues 87
- DXLink Fiber Troubleshooting 87
- Technical Support 88
- Important Upgrade Information 90
- Transferring KIT Files 91
- Firmware Versions 92
- Example: 93
- Telnet Username and Password 94
- Telnet Commands (continued) 100
- Guidelines 108
- TCP vs. UDP 108
- URL vs. NDP vs. Auto 109
- Windows Client Programs 109
- Linux Telnet Client 109
- Creating a Virtual Master 112
- CONNECTION and press Enter 115
- Overview 116
- HDMI Connector Cable Pinout 116
- HD-15 Connector Cable Pinout 117
- DVI Cable Connector Pinout 118
- CEA (RGB Color Space): 123
- CVR (RGB Color Space): 124
- CVT (RGB Color Space): 125
- DMR (RGB Color Space): 126
- DMT (RGB Color Space): 126
- DXLink Fiber and EDID 130
- USER EDID 1 131
- USER_EDID_MODIFIED 131
- MIRROR OUT 1 131
- MIRROR_OUT_LOCAL 131
- AMX EDID Library 131
- Software Installation on PC 132
- DXLink Fiber Connection to PC 133
- EDID Programmer tab 133
- EDID Programmer View 134
- Read Error Message 136
- 02/28/14 137
Produits connexes et manuels pour Équipement musical supplémentaire AMX DXLink Multi-Format SMF-D
(52 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.665 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels