AMX Distributed Audio Controllers Delta Series Spécifications télécharger pdf (Page 157)

Chapter 5 Parameters|VFD-B Series

5-100 Revision July 2008, BE16, SW V4.08 & V5.00

10 - 13  ASR (Auto Speed Regulation) control (with PG only) (I) Unit: 0.01

Settings 0.00 to 100.00 Factory Setting: 1.00

0.00 disable

 This parameter specifies Integral control and associated gain (I), and is used for speed control

with PG (encoder) feedback.

NOTE

The parameter can be set during operation for easy tuning.

10 - 14 Speed Control Output Frequency Limit Unit: 0.01

Settings 0.00 to 100.00 Hz Factory Setting: 10.00

 This parameter limits the amount of correction by the PI control on the output frequency when

controlling speed via PG (encoder) feedback. It can limit the maximum output frequency.

10 - 15

Sample time for refreshing the content of 210DH and

210EH

Settings 0.01~1.00 seconds Factory Setting: 0.10

 When the signal source of feedback control is PG (encoder) and it needs to read the pulse

numbers from communication, this parameter can be used to set the refresh time of two

communication addresses (210D and 210E).

Speed Control Diagram

10-13

10-12

10-14

Speed Control Diagram

Frequency

command

Speed

Detection

Output

Frequency

Limit

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 238 239

Pas de commentaire

AMX Distributed Audio Controllers Delta Series Spécifications Page 157