AMX RPMLoader Manuel d'utilisateur télécharger pdf (Page 6)

Configuring Lighting Systems

RPM Device Configuration Guide - NXB-CCG NetLinx Clear Connect Gateway

These scenes represent the presets that will be accessible to the end user via the touch panel’s lighting control page.

As indicated in FIG. 3, each of the scenes has a default name that indicates its functionality.

3. Optionally, edit the Scene Names as desired. FIG. 4 shows an example of edited Scene Names (see Scenes 1-4

below):

4. Click Next to save changes.

FIG. 3 Lighting - Device Details page: Configuration tab (default settings for Scenes 1-6)

FIG. 4 Lighting - Device Details page: Configuration tab (Scenes Names 1-4 edited)

If a Scene Name is left blank, then that Lighting Scene will not be included in the

finished project. To "delete" a scene, delete its’ Scene Name.

The six lighting scenes must be programmed on the NXB-CCG (NetLinx® Clear

Connect™ Gateway). See the Configuring the NXB-CCG section on page 3 for

details.

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Pas de commentaire

AMX RPMLoader Manuel d'utilisateur Page 6