AMX RPMLoader Manuel d'utilisateur télécharger pdf (Page 31)

Assigning Lighting Scenes to Macros

RPM Device Configuration Guide - NXB-CCG NetLinx Clear Connect Gateway

Assigning Lighting Scenes to Macros

Overview

Each Lighting Scene can be added to a new or existing macro. The following instructions describe creating a new macro

and adding a Lighting Scene as a macro item:

1. Click Macros in the menu bar to open the Macros page (FIG. 69):

2. Click Add Macro to access the Macro Details page. where you will configure a new macro.

3. In the Macro Name text box, enter a descriptive name for a lighting macro (required).

Since this macro will be associated with one of the Lighting Scenes configured in the Lighting - Device Details

page (see FIG. 70), the macro name should relate to the Lighting Scene to which the macro will be associated. For

example, if Scene 1 was named "20% Dim" (as shown in FIG. 70), then a logical Macro Name would be along the

lines of "Dim Lights".

4. Select a Macro Icon (required). Since this macro is for Lighting, select the Lighting icon from the drop-down list.

5. If there is a specific touch panel page on which you want to place the button for this macro, then select the desired

page from the Touch Panel Navigation drop-down (optional, default = not used).

6. Under Select a Device, select Lighting from the drop-down menu.

7. Under Select a Function, select the function to associate with this macro from the drop-down menu. Note that the

items in this menu represent the Scene Names that were configured in the Lighting - Device Details page

(Configuration tab).

8. Under Add Macro Item, click Add to add the new macro to the Macro Items list (FIG. 70):

FIG. 69 Macros page

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

AMX RPMLoader Manuel d'utilisateur Page 31