AMX APEX Destiny 6100 Spécifications télécharger pdf (Page 53)

Off-hook duration: The system can be programmed to enter two-way after a digital communication. This

location determines how long the system will hold the line without a valid two-way

command before automatically dropping the line. Valid times are 000 - 255,

000 = 256 seconds.

C. S. handshake: This location determines the amount of time the communicator will wait for a central

station receiver digital handshake.

Callback wait duration: The amount of time the panel will wait after a digital communication for the central

station to call during a two-way callback session.

Voice only wait period: Amount of time the system will wait for a valid code during a secured two-way callback

or voice only session.

Dial attempts: This option controls the maximum number of times the communicator will attempt to

call the central station. If the communicator is unable to connect with a central station,

the system will either stop dialing or begin dialing an alternate phone number. The

system can be programmed to show communicator trouble at the keypad if all dialing

attempts are unsuccessful. A communicator trouble condition will automatically clear

from the keypad the next time the system is armed.

Touch tone / pulse: This location determines the type phone service the panel uses for dialing. Program 000

for touch-tone or 001 for rotary.

Ignore dial toner: This removes the dial tone detect in the panel for cellular backup units that do not

supply dial tone.

Reporting Options

Silent Knight Slow: Silent Knight, Ademco, Vertex, Adcor - 1400Hz handshake/kiss-off, 1900Hz data

transmission, 51/49 millisecond tone (10 baud), 600 millisecond inter-digit delay

Silent Knight Fast: Silent Knight Fast - 1400Hz handshake/kiss-off, 1900Hz data transmission, 40/30

millisecond tone (15 baud), 560 millisecond inter-digit delay

Sescoa Fast: Sescoa, Acron, Vertex, DCI, Franklin - 2300Hz handshake/kiss-off, 1800Hz data

transmission, 30/20 millisecond tone (20 baud), 800 millisecond inter-digit delay

Multiple reports: Multiple reports will be sent to the central station in one phone connection as opposed

to hanging up and re-dialing for each report.

Voice only: This option is used for any reporting that is not a central station. Most commonly, this

option is used for two-way calls to a users office or a numeric pager.

There are three security options associated with a voice only communication, one digit

access, full code access, and entering 0 to exit to keypad mode. If either of the access

code options are selected, the panel will call the defined phone number and play a

repeated beep until a valid code is entered or the voice only time expires. If neither

code option is selected, the system will be in listen-in mode when the phone is

answered. Without the "0 exits to keypad mode" option selected, the caller will not

have access to keypad mode.

When using a number pager, do not select one digit or full access code options and the

panel will only make one dialing attempt.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 83 84

Pas de commentaire

AMX APEX Destiny 6100 Spécifications Page 53