AMX APEX Destiny 6100 Spécifications télécharger pdf (Page 11)

Retainer Clip

(Note Position)

Retainer Slot

Locked

Unlocked

Control Board

Can

Plastic Mounting Clip

Inserting the Cabinet Lock

1. Remove the cabinet door

2. Remove the lock knockout from the control cabinet door. Insert the

key into the lock. Position the lock in the hole making certain that

the latch will make contact with the latch bracket when the door is

closed.

3. Hold the lock steady, and insert the retainer clip into the retainer

slots. Position the clip as illustrated in order to permit easy removal.

Mounting the Control Board

1. Hang the three (3) mounting clips (provided) on the raised cabinet

(see below).

2. Insert the top of the circuit board into the slots at the top of the

cabinet. Be certain that the board rests in the correct row (see

below).

3. Swing the base of the board into the mounting clips and secure the

board to the cabinet with the accompanying screws (see below).

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 83 84

Pas de commentaire

AMX APEX Destiny 6100 Spécifications Page 11