AMX MAX-HT12T Manuel d'instructions télécharger pdf (Page 9)

Modero X Series Touch Panels (10.1", 7"& 4.3")

MXD/T-1000, MXD/T-700 and MXD-430 Modero X Series® Touch Panels

Picture View Send Command (^PIC)

The ^PIC Send Command stops either mode of Picture View, or starts Preview Mode. For more information, please

refer to the Modero S Series Programming Guide, available at www.amx.com.

Cleaning the Touch Overlay and Case

When cleaning the device, do not directly spray the device with cleaning fluid. Instead, spray the cloth and

then apply the cloth to the touch screen.

Do NOT use abrasives of any type to clean the device, as abrasives may permanently damage or remove the

device’s finish.

A Note About Wall and Rack Installation

Some products are installed in areas of differing temperature and cooling methodologies. These include products

installed in walls, racks, cabinets, etc. Those areas may have different temperatures and/or cooling approaches that must

be taken into consideration to maintain the product within the specified operating temperature.

FIG. 6 shows an AMX device installed in a wall with a filled volume (such as with insulation or concrete), as well as

with a closed volume (such as between studs in an otherwise finished wall). The diagram shows how heat generated by

the device or other devices may have no way to escape, and may build up to levels that may affect device operation.

In FIG. 7, the diagram displays an AMX device in a typical rack mounting, with full air circulation around the front and

back of the device. In this case, the main concern is with heat building up between components, possibly to levels that

may affect device operation.

All images must be in JPEG format. PNG and other image formats cannot be viewed

through Picture View.

FIG. 6 Heat convection in filled or closed volume, limited or no convection

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 61 62

Pas de commentaire

AMX MAX-HT12T Manuel d'instructions Page 9