AMX MVP-5150 Spécifications télécharger pdf (Page 83)

Protected Setup Pages

MVP-5100/5150 5.2" Modero Viewpoint Touch Panels

EAP-PEAP

In the Wireless Security: Enterprise Mode popup window (FIG. 53), press the Security Type field to select

EAP-PEAP.

PEAP (Protected Extensible Authentication Protocol) was developed as a way to securely transmit

authentication information, such as passwords, over a wireless network environment. PEAP uses only

server-side public key certificates and therefore does not need a client (panel) certificate which makes

the configuration and setup easier.

The PEAP protocol has two main versions:

PEAPv0

PEAPv1

PEAP uses several inner authentication mechanisms, the most common of which are:

MSCHAPv2 with PEAPv0

GTC with PEAPv1

EAP-PEAP security is designed for wireless environments where it is necessary to transmit data securely

over a wireless network.

EAP-PEAP Settings

SSID: Opens an on-screen keyboard to enter the SSID name used on the target AP.

The SSID is a unique name used by the AP, and is assigned to all panels on

that network. An SSID is required by the AP before the panel is permitted to

join the network.

• The SSID is case sensitive and must not exceed 32 characters.

• Make sure this setting is the same for all points in the wireless network.

• With EAP security, the SSID of the AP

must be entered. If it is left blank, the

panel will try to connect to the first access point detected that supports

EAP. However, a successful connection is not guaranteed because the

detected AP may be connected to a RADIUS server, which may not

support this EAP type and/or have the proper user identities configured.

Identity: Opens an on-screen keyboard to enter an EAP Identity string (used by the

panel to identify itself to an Authentication (RADIUS) Server).

Note: This information is similar to a username used to login to a secured

server or workstation. This works in tandem with the Password string, which

is similar to the password entered to gain access to a secured workstation.

Typically, this is in the form of a username such as [email protected].

Password: Opens an on-screen keyboard to enter the network password string specified

for the user entered within the

Identity field (used by the panel to identify itself

to an Authentication (RADIUS) Server)

Note: This information is similar to the password entered to gain access to a

secured workstation.

Certificate Authority: When pressed, the panel displays an on-screen Certificate Authority (CA)

File Location keyboard, which allows you to enter the name of the certificate

authority file which is used to validate the server certificate.This field is

optional.

If a server certificate is used, it should first be downloaded into the panel and

the

Certificate Authority field should then be set to the name of that certificate

file. No file path should be used for this setting as all certificates are stored in

a specific directory that the user cannot control or change.

Use the on-screen keyboard’s Clear button to erase completely any

previously stored network path information.

PEAP Version: When pressed, this field cycles through the choices of available PEAP:

PEAPv0, PEAPv1, or PEAPv1 w/peaplabel=1.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 189 190

Commentaires sur ces manuels

Pas de commentaire

AMX MVP-5150 Spécifications Page 83

Commentaires sur ces manuels

Produits connexes et manuels pour Télécommandes AMX MVP-5150