AMX AVS-MD4-CP10 Manuel d'instructions télécharger pdf (Page 7)

Executing Switches

CP-10 Instruction Manual

The example following switches Input 1 to Output 2 on Level 0.

To execute a switch:

At the Command screen, press the Change Key.

The Change screen appears.

2. At the Change screen, press the Level Key and enter “0.”

3. Press the Input Key and enter “1.”

4. Press the Output Key and enter “2.”

5. Press the Take Key.

Input 1 is routed to Output 2, and the system returns to the Command screen.

To execute a switch with multiple outputs:

Complete Steps 1 through 3 above.

2. Press an Output Key and then press the Space Key, repeating until all desired outputs are selected

(use no more than 33 outputs at one time).

If necessary, use the left and right arrow keys to navigate through the entries.

3. Press the Take Key.

Input 1 is routed to Outputs 2, 3, 4, and 5, and the system returns to the Command screen.

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Pas de commentaire

AMX AVS-MD4-CP10 Manuel d'instructions Page 7