AMX AVS-MD4-CP10 Manuel d'instructions télécharger pdf (Page 11)

Executing Presets

CP-10 Instruction Manual

Executing Local Presets

Note: Executing a local preset does not change any system routings that are not part of the preset.

Make sure the CP-10 is on the level (virtual matrix) where the local preset resides.

To return to the Command screen at any time, press the Cancel Key.

The example below executes Local Preset 6 on Level 0.

To execute a local preset:

At the Command screen, press the Preset Key.

The Global preset screen appears.

2. Press the Level Key to access the Local Preset screen

The Local preset screen appears with the cursor after the Level prompt.

3. Enter “0” for the level.

Caution: Before selecting multiple presets, make sure all the presets switch on the same level.

4. Press the Preset Key again and enter “6.”

When entering multiple presets, separate the numbers by pressing the Space Key after each entry.

5. Press the Take Key.

Local Preset 6 is executed and the system returns to the Command screen.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Pas de commentaire

AMX AVS-MD4-CP10 Manuel d'instructions Page 11