AMX NetLinx NXB-KNX Manuel d'instructions télécharger pdf (Page 44)

Cross-Line Communication

NXB-KNX KNX Communications Gateway

4. Verify that NXB-KNX is selected, and click Import.

Adding the Virtual Device to the ETS3 Project

Once the import procedure is complete, the virtual device must be added to the ETS3 project:

1. Identify the appropriate Area and Line at which the physical NXB-KNX will be connected, and

right-click on the Line name (heading) to access the context menu (FIG. 25):

2. Select Add Devices to invoke the Product Finder dialog (FIG. 26):

FIG. 24 Selective Import dialog

FIG. 25 ETS3 - Topology in Default Project - context menu

FIG. 26 Product Finder dialog

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 63 64

Pas de commentaire

AMX NetLinx NXB-KNX Manuel d'instructions Page 44