AMX NetLinx NXB-KNX Manuel d'instructions télécharger pdf (Page 20)

Configuration

NXB-KNX KNX Communications Gateway

Select NIST Servers from the Clock Manager sub-menu (or from the main Clock Manager page), and the NIST Server

Manager page will be displayed (FIG. 20):

Note that this tab is enabled only if Network Time is selected (on the Mode Manager page).

The options on this page allow you to select the NIST server that will be queried at each clock synchronization, and

allow you to add more NIST servers to the list.

To add a NIST server, enter the NIST Server Name, IP Address and Location in the fields provided.

To remove a NIST server from the list, click the Remove button.

Click Accept to save your changes. Note that changes on this page take effect immediately.

Click Cancel to cancel any changes.

FIG. 20 Clock Manager - NIST Server Manager page

Only one NIST server is selectable at any given time.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 63 64

Pas de commentaire

AMX NetLinx NXB-KNX Manuel d'instructions Page 20