AMX Modero NXD-700Vi Informations techniques télécharger pdf (Page 106)

Firmware Pages and Descriptions

7" Modero Widescreen Touch Panels

Open security does not utilize any encryption methodology, but requires an SSID (alpha-numeric) entry.

This entry must match the Network Name (SSID) entry of the target WAP so the panel knows what

device it is using to communicate with the network.

 Refer to the Configuring a Wireless Network Access section on page 33 for further details on

these security options.

 Refer to the Using the Site Survey tool section on page 34.

Static WEP Settings

Press the Static WEP button to open the Static WEP Settings page (FIG. 68).

Open (Clear Text) Settings

SSID (Service Set Identifier): Opens an on-screen keyboard to enter the SSID name used on the target

WAP.

The SSID is a unique name used by the WAP, and is assigned to all panels

on that network. An SSID is required by the WAP before the panel is permit-

ted to join the network.

• The SSID is case sensitive and must not exceed 32 characters.

• Make sure this setting is the same for all points in your wireless network.

• NXA-WAP200Gs use AMX as their default SSID.

• If this field is left blank, the panel will attempt to connect to the first available

WAP.

Save/Cancel: • Save - store the new security information, apply changes, and return to the

previous page.

• Cancel - discard changes and return to the previous page.

FIG. 68

Wireless Settings page - Static WEP Settings

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 231 232

Pas de commentaire

AMX Modero NXD-700Vi Informations techniques Page 106