AMX DESIGN XPRESS V 1.5 - PROGRAMMER GUIDE Guide de l'utilisateur télécharger pdf (Page 154)

140

DAK

KwikNet Low Level Services

Network Attributes

Each network parameter structure includes a field which is used to specify the network

interface attributes. The structure name, field name and allowable attributes are

dependent upon the interface type.

Interface Structure Field

Ethernet knx_np_ether xp_ether_ipattr

SLIP knx_np_slip xp_slip_ipattr

PPP knx_np_ppp xp_ppp_ipattr

The network attributes are specified by ORing the value 0 with one or more of the

following attribute bit masks from KwikNet header file KN_COMN.H.

Ethernet:

KN_IPATTR_DHCP Use DHCP for IP address acquisition

KN_IPATTR_REBOOT Use DHCP (reboot) for IP address acquisition

KN_IPATTR_BOOTP Use BOOTP for IP address acquisition

KN_IPATTR_AUTOIP Use Auto IP for IP address acquisition

SLIP and PPP:

KN_IPATTR_GATEWAY Set default gateway to remote peer's IP address

Ethernet, SLIP and PPP:

KN_IPATTR_IPFW Allow IP forwarding (unicast)

KN_IPATTR_IPFWBCAST Allow IP forwarding (directed broadcast)

Ethernet and PPP:

KN_IPATTR_IPUSEALL IPv4 and IPv6 (both needed)

KN_IPATTR_IPUSEANY IPv4 and/or IPv6 needed

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 315 316

Pas de commentaire

AMX DESIGN XPRESS V 1.5 - PROGRAMMER GUIDE Guide de l'utilisateur Page 154