AMX VSS2 Manuel d'utilisateur télécharger pdf (Page 7)

Product Information

SS2 Video Sync Sensor

Product Information

The AMX VSS2 Video Sync Sensor (Figure 1) is equipped with two independent channels to

detect video sync signals. The channels generate a logic-level output when a horizontal sync signal

is detected.

You can use the VSS2 for systems that require true power status for a VCR, tuner, or satellite

receiver. The VSS2 monitors the video output of each source and sends a logic signal to a AMX

input port in the AXCESS Central Controller. You can also use the logic signal output to control

AMX closure-driven peripherals such as a PC1 Power Controller. Since most video source

equipment generates blue screen video output when they are on, the VSS2 can sense true on and off

status.

Front Panel

FIG. 1 illustrates the front panel of the VSS2.

Rear Panel

FIG. 2 illustrates the rear panel of the VSS2.

FIG. 1 Front Panel

FIG. 2 Rear Panel

Sense 2 LED

Sense 1 LED

Power LED

12 VDC power

supply connector

Sense Out (output)

connector

Video 1 and 2

connectors

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Pas de commentaire

AMX VSS2 Manuel d'utilisateur Page 7