AMX NXI Spécifications télécharger pdf (Page 15)

Programming

NXI NetLinx Integrated Controller (No Master)

Program Port Commands (Cont.)

SET DATE Prompts you to enter the new date for the Master Card.

When the date is set on the Master Card, the new date will be reflected on all

devices in the system that have clocks (i.e. touch panels). By the same token, if

you set the date on any system device, the new date will be reflected on the

system’s Master, and all connected devices.

This will not update clocks on devices connected to another Master

(in Master-to-Master systems).

SET DNS <D:P:S> Prompts you to enter a Domain Name, DNS IP #1, DNS IP #2, and DNS IP #3.

Then, you enter Y (yes) to approve/store the information in the Master Card.

Entering N (no) cancels the operation.

SET IP <D:P:S> Prompts you to enter a Host Name, Type (DHCP or Fixed), IP address, Subnet

Mask, and Gateway IP address. Enter Y (yes) to approve/store the information in

the Master Card. Entering N (no) cancels the operation.

SET TIME Prompts you to enter the new time for the Master Card.

When the time is set on the Master Card, the new time will be reflected on all

devices in the system that have clocks (i.e. touch panels). By the same token, if

you set the time on any system device, the new time will be reflected on the

system’s Master, and all connected devices.

This will not update clocks on devices connected to another Master

(in Master-to-Master systems)

SET URL <D:P:S> Prompts you to enter the URL address and port number. Enter Y (yes) to

approve/store the new addresses in the Master Card. Entering N (no) cancels the

operation.

SHOW DEVICE <D:P:S> Displays a list of all devices present on the bus.

SHOW LOG Displays the log of messages stored in the Master's memory. The Master logs all

internal messages and keeps the most recent messages. The log contains:

• Entries starting with first specified or most recent.

• Date, Day, and Time message was logged.

• Which object originated the message.

• The text of the message:

SHOW LOG [start] [end]

SHOW LOG ALL

• If start is not entered, the most recent will be first.

• If end is not entered, the last 20 messages will be shown.

• If ALL is entered, all stored messages will be shown, starting with the most

recent.

SHOW NOTIFY Displays a list of devices that other systems have requested input from and the

types of information needed. Note that the local system number is 1061.

SHOW REMOTE Displays a list of the devices this system requires input from and the types of

information needed. When a NetLinx master connects to another NetLinx master,

the newly connecting system has a device that the local system desires input

from; the new system is told what information is desired from what device. Note

the local system number is 1062.

SHOW ROUTE Displays information about how this NetLinx master is connected to other NetLinx

masters.

SHOW SYSTEM Provides a list of all devices in all systems currently on-line. The system’s lists are

either directly connected to this master (i.e. 1 hop away), or are referenced in the

DEFINE_DEVICE section of the NetLinx program.

You may provide the desired system number as a parameter to display only that

system's information (e.g. SHOW SYSTEM 2001). The systems listed are shown

in numerical order.

TCP LIST Lists all active TCP/IP connections.

TIME Displays the current time on the Master Card.

URL LIST <D:P:S> Displays the list of URL addresses programmed in the Master Card.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

AMX NXI Spécifications Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Contrôleurs périphériques AMX NXI