AMX Current Sensors PCS Manuel d'instructions télécharger pdf (Page 16)

Operation and Programming

PCS and PCS2 Power Current Sensors

! A one- or two-second delay.

! Verification of status changes.

During transitions between states, the PCS may take 1 to 2 seconds to stabilize and its output

indication may be incorrect. Failure to observe this delay may cause the Axcess, Axcent

, or

Axcent

system to repeatedly cycle power on the unit being sensed.

PCS2 Programming

When connecting a unit/system to the PCS2, be aware that a 1 or 2 second PCS2 circuitry

stabilization consideration must be accounted for.

During transitions between states, the PCS2 may take 1 to 2 seconds to stabilize and its initial

output indication may be incorrect. Failure to account for this possible de-lay may cause the

Axcess, Axcent

, or Axcent

system to repeatedly cycle power on the unit being sensed.

1 2 ... 11 12 13 14 15 16 17 18

Pas de commentaire

AMX Current Sensors PCS Manuel d'instructions Page 16