Amx Audio-Only Module MAX-AOM Manuel d'utilisateur télécharger pdf (Page 12)

MAX-AOM Audio-Only (USB) Module

MAX AOM and AVM Modules

3. Position the SIde Mounting Bracket to AOM #1, using the tabs to ensure proper positioning, Use six

of the supplied screws to secure the Side Mounting Bracket to AOM #1 (FIG. 7).

4. Use the tabs on the Side Mounting Bracket to position and connect the AOMs.

5. Secure the AOM #1/side bracket assembly to AOM #2 using the supplied screws. Two screws in the

front and two in the back secure the Side Mounting Bracket to the AOM #2 enclosure.

6. Use three screws to attach the Short Rack-Mount Bracket to the front left side of AOM #2, then

secure the short bracket/AOM #2 assembly to the equipment rack with two screws (on the front of

the bracket) (FIG. 8).

7. Replace the Faceplate (FIG. 9).

FIG. 7 Securing the Side Mounting Bracket

FIG. 8 Attaching the Short Rack-Mount Bracket

FIG. 9 Replacing the Faceplate

Side Mounting Bracket

(front) (front)

AOM #2 AOM #1

These mounting surfaces (on front and rear of

the bracket) secure the AOM #1/bracket

assembly to AOM #2

(front) (front)

Rack-Mount

Short

Bracket

Faceplate

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Pas de commentaire

Amx Audio-Only Module MAX-AOM Manuel d'utilisateur Page 12