NXC-IRS4 4-Port IR/S Control Card

NetLinx Cardframe, Control Cards, and NetModules

NXC-IRS4 Send_Commands (Cont.)

Command Description

PON

Turn ON a device connected

to an IR port based on the

status of the corresponding

I/O Link input.

If at any time the IR sensor input reads that the device is OFF (such as if one

turned it off manually at the front panel), IR function 27 (if available) or IR

function 9 is automatically generated in an attempt to turn the device back ON.

If three attempts fail, the IR port will continue executing commands in the buffer

and trying to turn the device On.

If there are no commands in the buffer, the IR port will continue trying to turn

the device ON until a 'POF' or 'POD' command is received. If the IR port fails to

turn the device ON, a PUSH and RELEASE is made on channel 254 to indicate

a power failure error.

You can only use the 'PON' and 'POF' commands when an IR device has a

linked I/O channel. Channel 255 changes are disabled after receipt of this

command.

Syntax:

SEND_COMMAND <DEV>,"'PON'"

Example:

SEND_COMMAND IR_1,"'PON'"

Sends power up IR commands 27 or 9 to the IR_1 port.

PTOF

Set the time duration

between power pulses in

.10-second increments.

This time increment is stored in permanent memory. This command also sets

the delay between pulses generated by the 'PON' or 'POF' send commands in

tenths of seconds. It also sets the delay required after a power ON command

before a new IR function can be generated. This gives the device time to power

up and get ready for future IR commands. It also sets the delay required after a

power ON command before a new IR function can be generated. This gives

the device time to power up and get ready for future IR commands.

Syntax:

SEND_COMMAND <DEV>,"'PTOF',<time>"

Variable:

time = 0 - 255. Given in 1/10ths of a second. Default is 15 (1.5 seconds).

Example:

SEND_COMMAND IR_1,"'PTOF',15"

Sets the time between power pulses to 1.5 seconds for the IR_1 device.

PTON

Set the time duration

between power pulses in

.10-second increments.

This time increment is stored in permanent memory. This command also sets

the pulse length for each pulse generated by the 'PON' or 'POF' send

commands in tenths of seconds.

Syntax:

SEND_COMMAND <DEV>,"'PTON',<time>"

Variable:

time = 0 - 255. Given in 1/10ths of a second. Default is 5 (0.5 seconds).

Example:

SEND_COMMAND IR_1,"'PTON',15"

Sets the duration of the power pulse to 1.5 seconds for the IR_1 device.

SET INPUT LINK

Sets an IR device to link to an

input channel for use with

'PON' and 'POF' commands.

The input channel is used for

power sensing (via a PCS).

Sets an IR device to link to an input channel for use with 'PON', and 'POF'

commands. This input channel is used for power sensing (via the PCS). A

channel of zero disables the link.

Syntax:

SEND_COMMAND <DEV>,"'SET INPUT LINK <channel>'"

Variable:

channel = 1 - 4. Setting the channel to 0 disables the link.

Example:

SEND_COMMAND IR_1,"'SET INPUT LINK 1'"

Sets the IR_1 port link to I/O channel 1. The IR port uses the specified input as

power status for processing PON and POF commands.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 49 50

Commentaires sur ces manuels

Pas de commentaire

Sony SVS1313ZDZB Handbücher

Bedienungsanleitungen und Benutzerhandbücher für Powerbanks Sony SVS1313ZDZB.
Wir stellen 1 PDF-Handbücher Sony SVS1313ZDZB zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Schnellstart Benutzerhandbuch

Sony SVS1313ZDZB Schnellstart Benutzerhandbuch (1 Seiten)

Marke: Sony | Kategorie: Power banks | Größe: 0.44 MB |

Inhaltsverzeichnis

Initial Setup

Parts and Controls

Care and Handling Tips

Weitere Produkte und Handbücher für Powerbanks Sony

Modelle	Dokumententyp
NWZ-W262	Bedienungsanleitung Sony NWZ-W262 User's Manual, 2 Seiten
SVE14A35CXH	Schnellstart Benutzerhandbuch Sony SVE14A35CXH Quick Start Manual, 2 Seiten
SVE14137CXB	Schnellstart Benutzerhandbuch Sony SVE14137CXB Quick Start Manual, 2 Seiten
ILCE-3000	Anmerkungen Sony ILCE-3000 Notes, 2 Seiten
AC-UP100	Bedienungsanleitung Sony AC-UP100 User manual [en] , 2 Seiten
SVF14212CXB	Schnellstart Benutzerhandbuch Sony SVF14212CXB Quick Start Manual, 2 Seiten
CP-ELS/B	Datenblatt Sony CP-ELS/B, 2 Seiten
Walkman BCR-NWU7	Bedienungsanleitung Sony Walkman BCR-NWU7 User's Manual, 2 Seiten
NPA-MQZ1K	Bedienungsanleitung Multi Battery Adaptor Kit 多電池供應器套件, 2 Seiten
NPA-MQZ1K	Bedienungsanleitung Sony NPA-MQZ1K Adaptateur multi batteries Mode d’emploi, 2 Seiten