AMX HPX-1600 Manuel d'installation télécharger pdf (Page 28)

Installing the HPX-1600

HPX-1600 Retractable Connection Port

Step 10 - Install Shields

1. Secure the two shields to each other using the 8 supplied screws.

Ensure that any fixed cables pass through the assembled shield appropriately.

2. Snap the assembled shield onto the lower portion of the mounting sleeve.

3. Install the four additional mounting screws into the top of the shield to secure the shield to the mounting

sleeve (FIG. 22).

FIG. 22 Installing the Shields

Shields

4 screws secure the top

of the Shields to the

Mounting Sleeve

8 screws (4 on each side)

secure the two Shields to

each other

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 37 38

Pas de commentaire

AMX HPX-1600 Manuel d'installation Page 28