AMX Rack Rail Kit MMS Servers Guide d'installation télécharger pdf (Page 18)

1-4

Installing a Media Server

Connecting the Media Server Cables

You need to connect the Media Server to a keyboard, mouse, and

monitor, or to a keyboard/video/mouse switch (KVM), the Fibre

Channel switch, and your network. Do one of the following:

t If you are connecting a standard keyboard, mouse and monitor to

the Media Server, continue with “Connecting a Standard

Keyboard, Monitor, and Mouse” on page 1-4.

t If you are connecting a KVM to the Media Server, continue with

“Connecting a Media Server to the KVM” on page 1-5.

Connecting a Standard Keyboard, Monitor, and Mouse

If you are using a standard keyboard, monitor, and mouse, you can

install them on a desktop next to a rack or you can mount them on a

shelf in the rack.

Installing the Shelf

If you are installing a shelf, follow the instructions supplied with the

shelf to install it while ensuring that:

• The shelf does not interfere with the power strips, power cords, or

other cables at the back of the rack.

• The shelf allows the monitor to slide completely into the rack.

• You install the rails at the nearest U-alignment location.

• The bottom of the shelf is at the bottom of a U-alignment space.

0525701A_BK.book Page 4 Tuesday, April 16, 2002 9:25 AM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Pas de commentaire

AMX Rack Rail Kit MMS Servers Guide d'installation Page 18