AMX 68 Manuel d'installation télécharger pdf (Page 3)

Required Installation Tools

Voltmeter

Wire Strippers

Electric Drill & Bits

Phillips Screw Driver

Convoluted Tubing *

Solder Gun *

Wire Crimpers

Shrink Tube or Electrical Tape

* Op tional

Important Information

1.Test all circuits with a voltmeter.

2. Make all wiring connections with butt connectors. DO NOT twist wires

or use “scotch-lok” connectors.

3. Route RED, RED/WHITE and BLACK wires from the control unit

directly to the battery.

4. Keep extensions as short as possible. Use same gauge wires.

5. Before installing, discuss the placement of the LED indicator and valet

switch with the vehicle owner. DO NOT disconnect the battery cables.

6. Make all connections by removing the lug from the cable clamp

without detaching clamp.

7. Turn off dome light or remove dome light fuse to prevent battery drain.

This device complies with Part 15 of the FCC rules. Any changes or

modifications made to the system without the express approval of Avital

Technologies, Inc. could void the user's authority to operate this

equipment.

Diablo

/AMX 68/AT-58 Installation Manual 3/31/99

1 2 3 4 5 6 7 8 ... 14 15

Pas de commentaire

AMX 68 Manuel d'installation Page 3