AMX NX-4200 Manuel d'utilisateur télécharger pdf

Quick Start Guide

NX-4200 NetLinx Integrated Controller

Overview

This guide pertains to the NX-4200 NetLinx Integrated Controller

(FG2106-04). The purpose of this document is to illustrate how to set up

the device in its simplest configuration. Additional Documentation for this

device is available at www.amx.com:

• Refer to the NX-x200 Series Hardware Reference Manual for

additional details on installing, upgrading, and wiring the NX-4200.

• Refer to the NX Series NetLinx Integrated Controllers WebConsole &

Programming Guide for detailed configuration instructions.

What’s in the Box?

The following items are included with the NX-4200:

• 1 2-pin 3.5 mm mini-Phoenix (female) PWR connector

• 1 4-pin 3.5 mm mini-Phoenix (female) AxLink connector

• 2 6-pin 3.5 mm mini-Phoenix female I/O connectors

• 2 8-pin 3.5 mm mini-Phoenix female Relay connectors

• 2 10-pin 3.5mm mini-Phoenix female RS232/422/485 connectors

• 6 5-pin 3.5mm mini-Phoenix female RS232 connectors

• 2 CC-NIRC, IR Emitters (FG10-000-11)

• 2 removable rack ears

Power Supply

The suggested power supply for the NX-4200 is a 13.5 VDC 6.6 A output,

suitable for 50° C.

Environmental Requirements

The environmental requirements for the NX-4200 are as follows:

• Operating Temperature: 32° F (0° C) to 104° F (40° C)

• Storage Temperature: 4° F (-15° C) to 140° F (60° C)

• Operating Humidity: 5% to 85% RH

Connecting to Your Controller

Note: Ensure the PC you are using to connect to the controller has the

latest version of NetLinx Studio 4.0 installed on it.

Once the controller is powered on, you can connect to it through its IP address.

Note: NX-Series controllers fully support IPv6 network addressing. If the

LAN port is connected to an IPv6 capable network it will self select an

appropriate IPv6 address based on the discovered address parameters of

the network to which it’s attached.

Connecting to the NX-4200 over Ethernet

The NX-4200 is configured for DHCP addressing by default. The controller

uses link local addressing as a backup in case the DHCP server is

inaccessible. See the

Changing the IP Address section for information on

setting a static IP address. Verify there is an active LAN connection on the

controller’s LAN port before beginning this procedure.

1. Using category cable, connect the LAN port on the rear panel of the

controller to your external network.

FIG. 2

displays the location of the LAN port on the rear panel.

FIG. 1 NX-4200 rear panel

2. In NetLinx Studio, select Settings > Workspace Communications

Settings to open the Workspace Communication Settings dialog.

3. Click System Settings to open the Communication Settings dialog, and

select the Network tab.

4. Click Listen for Masters to open the Listen For Masters dialog, and click

Start Listening to begin listening for “blink” (UDP) messages from NetLinx

Masters on the same subnet. As Masters are discovered, they are added

to the List of Active NetLinx Master Controllers.

5. When you see the IP Address for the target Master in the List of Active

NetLinx Master Controllers, click Stop Listening.

6. Select the IP Address of the target Master and click Select to Add. The

New TCP/IP Setting dialog appears, indicating the selected IP address. Fill

in the available fields as necessary. Click OK to save changes and return

to the Communication Settings dialog. The new Master’s IP address now

appears in the List of Addresses.

7. With the newly added Master selected, click Select. The window updates

to indicate that the newly added and selected Master is now the current

communication configuration.

8. Click OK on each open dialog to exit and return to the workspace.

9. Refresh the Online Tree (select Refresh System Online Tree from the

Online Tree context menu) to connect to the Master.

Connecting to the NX-4200 via USB

If you do not have a DHCP server or if the controller has an unknown static

IP address, you obtain the IP address of the controller via USB.

1. Using a standard Type-B to Type-A USB cable, connect the Program

Port on the front panel of the controller to your PC.

FIG. 2 displays the location of the Program Port.

FIG. 2 NX-4200 front panel

2. Select Settings > Workspace Communications Settings to open the

Workspace Communication Settings dialog.

3. Click System Settings to open the Communication Settings dialog.

4. Select the USB tab. The USB tab features a list of Masters connected

to your PC via USB. The IP address of the Master appears in the IPv4

Address column.

5. Highlight your Master and click Select to connect to it.

Retrieving the IP Address of the NX-4200

The NX-4200 is configured for DHCP addressing by default. The controller

uses link local addressing as a backup in case the DHCP server is

inaccessible. The IP address of the NX-4200 is accessible from the front

panel LCD display on the unit.

1. Press the Display Control button on the front panel. The LCD display

beside the button activates.

2. Press downward on the Display Control button to navigate through the

status parameters until you reach LAN IPv4 Address. This is your

controller’s IP address which you can use to access the WebConsole.

FIG. 3 Display Control button

Switching the IP Address from a Dynamic to Static

To toggle between static and dynamic IP addresses,

hold the ID pushbutton

on the front panel of the NX-4200 for 10 seconds. When complete, the controller

automatically reboots itself. After the controller is fully booted, use the

Workspace Communications Settings dialog in NetLinx Studio to create a new

connection to the controller. See the Default IP Addresses section for the list of

default IP addresses.

Note: Ensure the controller is fully booted when you press and hold the ID

pushbutton. Pressing and holding the ID pushbutton while the controller is

booting resets the unit to its factory defaults.

Connect category cable

to the LAN port

Connect Type-B USB cable

to the Program Port

Display Control button

1 2

Résumé du contenu

Page 1 - Quick Start Guide

Quick Start GuideNX-4200 NetLinx Integrated ControllerOverviewThis guide pertains to the NX-4200 NetLinx Integrated Controller (FG2106-04). The purpos

Page 2 - Hardware Information

Commentaires sur ces manuels

Pas de commentaire

AMX NX-4200 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel d'enregistrement AMX NX-4200. Quick Start Guide - NX-4200 NetLinx Integrated Controller - AV-iQ Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel d'enregistrement AMX NX-4200