AMX CSG-580 Spécifications télécharger pdf (Page 43)

Configuring Communication

MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom

Configuring Wireless Network Access

The first step in connecting the MVP-9000i to a wireless network is to configure the wireless communication parameters

within the device’s System Settings page. This is done via the System Settings page, which allows configuration of the IP

Address, System Number and Username/Password information assigned to the target Master.

Step 1: Configure the Device’s WiFi Settings

The first step to a successful setup of the internal wireless card is to configure the WiFi tab on the System Settings page.

This section configures the communication parameters from the MVP panel to the web.

Wireless communication using a DHCP Address

In the Protected Setup page:

1. Touch the Network button to open the System Settings page.

2. Select the WiFi tab (FIG. 25).

3. Toggle the DHCP/Static field until the choice cycles to DHCP. This action causes all fields in the IP Settings

section, other than Host Name, to be greyed-out.

4. Press the optional Host Name field to open the Host Name keyboard (FIG. 26) and enter the host name information.

The default name is “localhost”.

5. Press OK after assigning the alpha-numeric string of the host name.

6. The remaining greyed-out fields in the IP Settings section cannot be altered. Once the panel is rebooted, these

values are obtained by the unit and displayed in the DNS fields after power-up.

FIG. 25 System Settings page - WiFi tab

FIG. 26 Host Name keyboard

This information can be found in either the Workspace - System name > Define

Device section of the code that defines the properties for the panel, or in the Device

Addressing/Network Addresses section of the Tools > NetLinx Diagnostics dialog.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 201 202

Pas de commentaire

AMX CSG-580 Spécifications Page 43