Instruction Manual HARRIER 15/80 HARRIER 18/80 CENTRIFUGE READ BEFORE USE! Models:- MSB080.CX1.1 MSB080.CX1.5 MSB080.CR1.K MSB080.
INTRODUCTION TO YOUR CENTRIFUGE 10 1.1 Specifications Refrigerated Non Refrigerated Power supply options 120v 60Hz single phase 230v 50Hz sing
INTRODUCTION TO YOUR CENTRIFUGE 11 The Harrier Centrifuge range are CE marked in line with required European Directives for Electromagnetic and L
GOOD OPERATOR PRACTICE 12 2. INSTALLATION Remove the centrifuge from its packaging and place it on a rigid, level surface. DO NOT LIFT THE CENT
GOOD OPERATOR PRACTICE 13 2.1 Connecting the power supply 230v centrifuge - Connect the 3-core cable to a 3-pin plug, fitted with a 13 amp fuse
GOOD OPERATOR PRACTICE 14 3. GOOD OPERATOR PRACTICE Please read the following notes before attempting to operate the centrifuge. 3.1 Spillage
GOOD OPERATOR PRACTICE 15 3.4 Infective samples Very special care is necessary when infective materials are to be centrifuged. Sealed container
THE CONTROL PANEL 16 4. THE DISPLAY AND CONTROL PANEL The displays and keys on the control panel are labelled as follows:- 1. Run time displa
HOW TO USE YOUR HARRIER 18/80 17 5. HOW TO USE YOUR HARRIER CENTRIFUGE Connect to the power supply. Press the power ON switch, -situated on the
HOW TO USE YOUR HARRIER 18/80 18 5.3 Fitting the rotor If the centrifuge has been supplied with a matched wind shielded rotor (MSB080.CR2.
HOW TO USE YOUR HARRIER 18/80 19 Refer to the chapter headed “Good Operator Practice” on page 14 for centrifugation of samples with the followi
MSE (UK) Ltd Health and Safety at Work MSE (UK) Ltd is required under the Health and Safety at Work Act 1974 and other UK legislation as designers, m
HOW TO USE YOUR HARRIER 18/80 20 5.8.2 Time hold If the unit is not required to run to a specific time press the TIME HOLD key, the time displ
HOW TO USE YOUR HARRIER 18/80 21 5.8.7 Entering acceleration and brake rate To change the acceleration and brake rate press the ACCEL/BRAKE ke
HOW TO USE YOUR HARRIER 18/80 22 5.12 Opening the lid if there is a power failure It will not be possible to open the lid by the normal method
ERROR MESSAGES 23 6. ERROR MESSAGES Any error message is intermittently displayed in the status display. The display is accompanied by an audib
ERROR MESSAGE TABLES 24 6.1 Error message table NOTE: If an error is not rectified by taking the suggested action, if it is erratic or pers
ERROR MESSAGE TABLES 25 ERROR MESSAGE EXPLANATION EFFECT ON MACHINE OPERATOR ACTION UNLOCKED Malfunction of lid lock mechanism or inter
ERROR MESSAGE TABLES 26 ERROR MESSAGE EXPLANATION EFFECT ON MACHINE OPERATOR ACTION NO TACHO Fault in tacho signal Machine will stop L
ERROR MESSAGE TABLES 27 ERROR MESSAGE EXPLANATION EFFECT ON MACHINE OPERATOR ACTION BAD CHKS Link to inverter is not functioning Machin
ERROR MESSAGE TABLES 28 ERROR MESSAGE EXPLANATION EFFECT ON MACHINE OPERATOR ACTION OVER 45° Bowl temperature is over 45°C Machine will
ERROR MESSAGE TABLES 29 ERROR MESSAGE EXPLANATION EFFECT ON MACHINE OPERATOR ACTION LID BAR Lid has been depressed Machine will stop
MSE (UK) Ltd WARRANTY Terms and Conditions We hope that you do not have the need to use the extensive warranty cover that MSE (UK) Ltd extends to
ROTORS AND ACCESSORIES 30 7. ROTORS AND ACCESSORIES The following pages contain tables listing the rotors and accessories which are availab
ROTORS AND ACCESSORIES 31 7.2 4 x 200 Swing out rotor - for use with Harrier 15/80 only MSE 43124-134 .4500 rpm (max. speed) Accessories
ROTORS AND ACCESSORIES 32 7.3 4 x 200 swing out rotor - for use with Harrier 15/80 only MSE 43124-134.4500 rpm (max. speed) Accessories 2
ROTORS AND ACCESSORIES 33 7.4 4 x 200 Swing out rotor - for use with Harrier 15/80 only MSE 43124-134 .4500 rpm (max. speed ) Accessor
ROTORS AND ACCESSORIES 34 7.5 Micro titration Rotor MSE 43121-117.2600 rpm. (max. speed) Accessories Support tray (96500-345) MID TRAY
ROTORS AND ACCESSORIES 35 7.6 6 X 50 Angle Rotor 43117-608. 6500 rpm. Accessories 50ml Spherical end bucket (43156-602) Sealed cap assemb
ROTORS AND ACCESSORIES 36 7.7 6 X 50 Angle Rotor Continued 43117-608. 6500 rpm. Accessories 50ml Spherical end bucket (43156-602) Sealed c
ROTORS AND ACCESSORIES 37 7.8 12 X 15 Angle Rotor 43117-607.6500 rpm. Accessories 15ml Spherical end bucket (43156-601) ADAPTOR TUBE
ROTORS AND ACCESSORIES 38 7.9 4 X 50ml Falcon Angle Rotor 43117-609.6500 rpm. Accessories 50ml Sealed falcon bucket (43156-603) ADAPT
ROTORS AND ACCESSORIES 39 7.10 24 X 1.5ml Angle Rotor 43117-612.18000 rpm. Accessories 1.5ml Disposable tubes (1000 off 43551-602) Har
CONTENTS 4 ELECTRICITY SUPPLY Before connecting this apparatus to the electricity supply, check the information given on the rating plate and e
ROTORS AND ACCESSORIES 40 7.11 24 X 1.5ml Sealed Angle Rotor 43117-612 18000 rpm. Accessories Lid(43117-614). 1.5ml Disposable tube (1000
MAINTENANCE 41 8. MAINTENANCE This section describes the basic maintenance procedures, in particular, the methods and materials used for cleani
MAINTENANCE 42 8.4 O-Rings Ensure that the O-Rings fitted to the sealing caps and covers are lightly coated with silicone grease. Check the O-R
MAINTENANCE 43 8.8 Replacing the fuse TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN ONLY. The main power supply incorporates a fuse protection o
10. HOW TO OBTAIN SERVICE ON YOUR HARRIER CENTRIFUGE MSE (UK) Ltd are committed to giving our customers the best possible service. If your centrif
CENTRIFUGE SERVICE REQUEST FORM Should it become necessary to have your MSE centrifuge repaired, please take a few moments to fill out this form
CONTENTS 5 1. INTRODUCTION TO YOUR CENTRIFUGE 7 1.1 Specifications...
CONTENTS 6 7. ROTORS AND ACCESSORIES...30 7.1 4 X 200 Windshield Swing
INTRODUCTION TO YOUR CENTRIFUGE 7 1. INTRODUCTION TO YOUR CENTRIFUGE The HARRIER range of performance bench top centrifuges joins the well estab
INTRODUCTION TO YOUR CENTRIFUGE 8 CE5904873CODE1ACCELBRAKEPRERCFTIMEHOLDCOOL62(DO NOT OBSTRUCT)AIR INLETREFRIGERANT CHARGE LABELHOLE FOR EMERGEN
INTRODUCTION TO YOUR CENTRIFUGE 9 CE5904873CODE1ACCELBRAKERCFTIMEHOLD62DISPLAY PANELLID OPENINGHOLE FOR EMERGENCYRELEASE HANDLECONTROL PANELRATI
Commentaires sur ces manuels