
Overview
1
NXV-300 Modero Virtual Touch Panel
Overview
The NetLinx NXV-300 Modero Virtual Touch Panel (FG2263-01) is a small rack-mountable device (similar in size to an
NI-700 NetLinx Controller) that allows users to access a network via any PC or Macintosh computer via Virtual Network
Connection (VNC). Instead of using an actual touch screen to interface with a network, users navigate to the device using
a browser (Internet Explorer, Firefox and Safari for PCs and Firefox and Safari for Macs) and login with a username and
password.
Product Specifications
FIG. 1 NXV-300 Modero Virtual Touch Panel
NXV-300 (FG2263-01) Specifications
Front Panel
Components:
• Power LED (green): Lights to indicate that the unit has powered up.
• Any state other than on indicates the unit is either not powered, or has not completed boot
up.
• Status LED (green): Lights to show the status of the connection between the NXV-300 and
the Master.
• User Connected LED (red): Lights to indicate a user remotely accessing the device.
• Maximum User LED (yellow): Lights to indicate that the device has the maximum number of
users (3) connected to it.
• Reset Button: Holding reset button for 5 seconds will access the Setup pages. Holding reset
button for 30 seconds will reset the device to factory defaults.
Rear Panel
Connectors:
Ethernet Port - 10/100 Ethernet with PoE. LEDs show communication activity, connection status,
speeds, and mode information:
• SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps and turns Off
when the speed is 10 Mbps.
• L/A (link/activity) - Green LED lights On when the Ethernet cables are connected and
terminated correctly, and blinks when receiving Ethernet data packets.
Power Requirements: • Maximum power draw: 2.2 watts
• PoE powered – no local Power Supply needed
• IEEE 802.3af Compliant
Memory: • 64 Mbytes of RAM
• 256 Mbytes of FLASH
Dimensions (HWD): 1.63" x 5.50" x 4.06" (4.13 cm x 13.97 cm x 10.32 cm)
Weight: 1.40 lbs. (0.64 kg)
Operating
Environment:
• Operating Temperature: 32°F - 104°F (0°C - 40°C)
• Relative Humidity: 5% to 85% non-condensing
• Intended for indoor use only
(front)
(rear)
Status LEDs
Reset button
Ethernet port
Commentaires sur ces manuels