AMX AXT-CV10 Manuel d'utilisateur télécharger pdf

Quick Start Guide

NXD/T-CV10 10”Modero Widescreen Video Touch Panels

For more detailed installation, configuration, programming, file transfer, and operating

instructions, refer to the NXD-CV10/NXT-CV10 Instruction Manual, available on-line at

www.amx.com.

ATTENTION!

Verify you are using the latest NetLinx Master and Modero touch panel firmware

(available from www.amx.com). Verify the TPDesign4 program being used is

Version 2.6 or higher.

Overview

These are the first 10" diagonal Widescreen Color Active video-capable touch panels

in the control and automation industry.

These Color Video (CV) panels display NTSC/PAL/SECAM video formats within

variable sized windows. They include a built-in microphone, speakers, audio/

headphone connector, and six NetLinx programmable pushbuttons (only available on

CV10 models with the button feature available (-02K and -03K)).

Table Top models use AMX's exclusive SmoothTilt™ technology for effortless

adjustment of the viewing angle.

Each panel is sold only as part of a CV10 Kit which includes both a panel and an

NXA-AVB/ETHERNET Audio/Video Breakout Box (FG2254-10).

The the three available Kit configurations are:

• NXD-CV10 (FG2259-02K) - 10" Wall Mount Kit (with buttons)

(includes an NXD panel and NXA-AVB/ETHERNET Breakout Box).

• NXT-CV10 (FG2259-01K) - 10" Table Top Kit (without buttons)

(includes both an NXT panel and an NXA-AVB/ETHERNET Breakout Box).

• NXT-CV10/PB (FG2259-03K) - 10" Table Top Kit (with buttons)

(includes both an NXT panel and NXA-AVB/ETHERNET Breakout Box).

Specifications

Panel Connectors

FIG. 2 shows the connectors located on the CV10 Modero Video panels. The Audio/

Video RJ-45 connector provides differential audio/video signals between the touch

panel and the NXA-AVB/ETHERNET. This connector routes Composite video, Stereo

(left/right) audio, and microphone audio.

NXA-AVB/ETHERNET Breakout Box

FIG. 3 shows the front and rear connectors on the NXA-AVB/ETHERNET breakout

box. This breakout box can be mounted on either a horizontal flat surface or in an

equipment rack (by removing the front faceplate and securing it to an optional AC-RK

Rack Kit).

FIG. 1

10" Modero Widescreen Video Touch Panels

CV10 Specifications

Dimensions (HWD):

NXA-RK10

(FG2904-54)

NXD-CV10

(FG2259-02)

NXT-CV10

(FG2259-01/03)

CB-TP10

(FG036-10)

• 5 RU (rack units) high (22.15 cm)

8.72" x 19.0" x 0.50" (22.15 cm x 48.26 cm x 1.27 cm)

• Faceplate included: 7.96" x 11.16" x 3.32"

(20.22 cm x 28.34 cm x 8.43 cm)

• Fully raised: 8.71" x 11.16" x 7.38" (22.12 cm x 28.34 cm x 18.75 cm)

Fully lowered height: 4.53" (11.51 cm)

• Conduit/wallbox: 5.47" x 7.23" x 3.40"

(13.90 cm x 18.40 cm x 8.64 cm) (optional)

Power Requirements

(stand-alone CV10):

• Constant current draw: 1.2 A @ 12 VDC (stand-alone)

• Startup current draw: 1.8 A @ 12 VDC (stand-alone)

Power Requirements

(CV10 and BASE/1):

• Constant current draw: 2.6 A @ 12 VDC

• Startup current draw: 3.9 A @ 12 VDC

Minimum power

supply required:

• PSN2.8 Power Supply (FG423-17)

- when used with a stand-alone CV10 unit.

• PSN4.4 Power Supply (FG423-45)

- when a CV10 is connected to a BASE/1.

Memory: • 64 MB SDRAM

• 64 MB Compact Flash (upgradable to 1 GB - factory programmed)

Weight: • NXD-CV10: 2.65 lbs (1.20 kg)

• NXT-CV10: 4.75 lbs (2.15 kg)

Certifications: • FCC Part 15 Class B, CE, and IEC 60950

Panel LCD

Parameters:

• Aspect ratio: 16 x 9

• Brightness (luminance): 350 cd/m2

• Channel transparency: 8-bit Alpha blending

• Contrast ratio: 250:1

• Display colors: 256 thousand colors (18-bit color depth)

• Dot/pixel pitch: 0.28 mm

• Panel type: TFT Color Active-Matrix

• Screen Resolution: 800 x 480 pixels (HV) @ 60 Hz frame frequency

• Video format: NTSC, PAL, and SECAM

Viewing Angle: • 95° total viewing angle

• Vertical: + 45° (up from center) and -65° (down from center)

IR Reception Angle: •Horizontal: + 50° (left and right from center)

• Vertical: + 30° (up and down from center)

NXD panel

(WallMount)

NXT panel (Table Top)

CV10 Specifications (Cont.)

Supported Audio

Sample Rates:

• 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz,

12000Hz, 11025Hz, and 8000Hz.

Front Panel: • Light Sensor: Photosensitive light detector for automatic adjustment of

the panel brightness

• Motion Sensor (PIR): Proximity Infrared Detector to wake the panel

when panel is approached

• IR Receiver: 38 KHz and 455 KHz AMX IR frequencies

• Sleep Button: Pushbutton (grey) provides both access to the Setup

and Calibration page and toggles the panel between a "sleep" or

"wake" state

• Microphone: Used for intercom applications (requires the

NXA-AVB/ETHERNET Breakout Box for analog communication)

• Speakers: Stereo output with a frequency response of 500 Hz - 7 KHz

• LEDs: 6 blue LEDs (support On and Off).

- Both the LEDs and pushbuttons are not available with the

NXT-CV10 panel (FG2259-01) containing no buttons.

• 6 programmable pushbuttons

Rear Connectors: • Mini-USB Connector: 5-pin Mini-USB connector used for

programming, firmware update, and touch panel file transfer between

the PC and the target panel

• Stereo Output Connector: Stereo output through a 3.5mm mini-jack

(for use with external speakers or headphones)

• Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication

• USB Connector: Type A USB port connects an external keyboard or

mouse device for use with Virtual PC applications

• Audio/Video Connector: RJ-45 connection for A/V signals (via CAT5)

between the NXA-AVB/ETHERNET Breakout Box and the panel

• Power: 2-pin 3.5 mm mini-Phoenix connector

Operating /Storage

Environments:

• Operating Temperature: 0° C (32° F) to 40° C (104° F)

• Operating Humidity: 20% - 85% RH

• Storage Temperature: -20° C (-4° F) to 60° C (140° F)

• Storage Humidity: 5% - 85% RH

Included

Accessories:

• Installation Kit for 10" NXD panels (KA2259-02):

- 2-pin 3.5 mm mini-Phoenix connector (41-5025)

- Three Drywall clips (62-5924-05) and #6 - sheet metal screws

(80-0192)

- Four Phillips-head screws (#4-40 x 0.250 Black) (80-0112)

• Installation Kit for 10" NXT panels (KA2259-01):

- 2-pin 3.5 mm mini-Phoenix connector (41-5025)

- One CAT5 Table Top Suppression Ferrite (04-0014)

- One cylindrical CAT5 USB Mouse Suppression Ferrite (04-0018-SA)

• Modero Table Top Cable (CA2250-50) provided with all NXT panels

• NXA-AVB/ETHERNET Breakout Box (FG2254-10)

- Provides video/audio distribution to the A/V panel over CAT5 cable

(up to 200’/60.96 m) and accepts either Composite or S-Video

• Trim Ring with button openings (60-2259-05)

(factory installed on -02 and -03 panel models only)

• Trim Ring without button openings (60-2259-04) (NXD models only)

Other AMX

Equipment:

• CB-TP10 Conduit/Wallbox (FG036-10)

• CC-USB (Type A) to Mini-B 5-Wire programming cable (FG10-5965)

• NXA-BASE/1 Battery Base Kit (FG2255-05K):

- battery base and single NXT-BP battery

• NXA-RK10 Rackmount Kit for 10" Wall Mount panels (FG2904-54)

• NXA-WC80211GCF, 802.11g Compact Flash Wireless Card Upgrade

Kit provides wireless Ethernet support (FG2255-07)

• NXT-BP Battery (FG2255-10)

• NXT-CHG Kit (FG2250-50K): single charger and 2 NXT-BP batteries

• PSN2.8 Power Supply (12 VDC) (FG423-17)

• PSN4.4 Power Supply (12 VDC) (FG423-45)

• Upgrade Compact Flash (factory programmed with firmware):

NXA-CV10CF128M - 128 MB Compact Flash card (FG2116-65)

NXA-CV10CF256M - 256 MB Compact Flash card (FG2116-66)

NXA-CV10CF512M - 512 MB Compact Flash card (FG2116-67)

NXA-CV10CF1G - 1 GB Compact Flash card (FG2116-68)

FIG. 2 Connector layout on the CV10 Touch Panels

PROGRAM

10/100

ETHERNET

KEYBOARD /

MOUSE

AUDIO / VIDEO

PWR

12VDC

Stereo

Audio-Video from

Ethernet

Power

NXA-AVB/ETHERNET

(CAT5)

Keyboard/Mouse

USB connector

Mini-USB

(Program Port)

(CAT5)

Output

1 2

Résumé du contenu

Page 1 - Quick Start Guide

Quick Start GuideNXD/T-CV10 10”Modero Widescreen Video Touch PanelsFor more detailed installation, configuration, programming, file transfer, and oper

Page 2 - Wiring for Balanced Audio

Commentaires sur ces manuels

Pas de commentaire

AMX AXT-CV10 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Téléviseurs et moniteurs AMX AXT-CV10. AMX NXT-CV10 10 Table Top Touch Panel Quick Start Guide Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Téléviseurs et moniteurs AMX AXT-CV10