AMX NXD-435P Guide d'installation télécharger pdf

Installation Guide

NXD-435P

4.3" Modero

Portrait Wall/Flush Mount Touch Panel

For more detailed installation, configuration, programming, file transfer, and operating

instructions, refer to the NXD-430/435 Operation/Reference Guide, available online at

www.amx.com.

Overview

The NXD-435P Modero

Portrait Wall/Flush Mount Touch Panel includes a mini-USB

port for programming, and five NetLinx-programmable buttons. All power is supplied

via Power Over Ethernet (PoE), utilizing a PS-POE-AF PoE Injector (FG423-80) or

equivalent PoE device.The NXD-435P comes in black (FG2262-14) and white

(FG2262-15).

Specifications

Panel Connectors and Wiring

FIG. 2 shows the connectors located on the bottom of the NXD-435P Modero panel.

The mini-USB port is used for programming the touch panel.

For more information on connection and use of the Panel Connectors, as well as

information on programming, please refer to the NXD-430/435 Operation/Reference

Guide, available at www.amx.com.

Capacitive Touch Buttons

The NXD-435P has one main button on the front of the device, in the center of the

bezel. This button has several uses:

• Press the button once to start a previously programmed function, or to turn off

the display if not previously programmed.

• Press and hold the button for 6 seconds to put the device into Setup Mode.

• Press and hold the button for 9 seconds to enter Calibration Mode.

• Press and hold the button for 20 seconds to reboot the panel.

The NXD-435 also has four smaller buttons, two above and two below the front button,

that may be programmed for individual functions.

All five buttons on the NXD-435P utilize capacitive touch, which detects the electrical

conductivity of human skin and reacts directly to touch. This allows the button to resist

wear and dirt, as the button does not have any actual physical button to depress.

NXD-435P Setup and System Connection

1. Carefully remove the panel from the shipping box, peel the protective plastic

cover from the LCD, and apply power to the panel via the PoE Injector.

2. From the right side of the LCD, press the front button for 9 seconds (passing

over the Setup page) to access the Calibration setup page and follow the on-

screen instructions to return to the main Setup page.

3. Press the on-screen Protected Setup button on the Setup page.

4. Enter the panel password into the on-screen keypad (default is 1988).

FIG. 1

NXD-435P-BL 4.3" Modero Wall/Flush Mount Touch Panel - Black

NXD-435P (FG2262-14/15) Specifications

Dimensions (HWD): • NXD-435P: 4.13” x 5.5” x 2.13" (10.48 cm x 13.97 cm x 5.40 cm)

• CB-TP5i Rough-In/Wallbox (optional): 4.27" x 5.14" x 3.40"

(10.86 cm x 13.06 cm x 8.64 cm)

Weight: • 0.65 lbs (0.29 kg)

Power

Requirements:

• PoE Powered - No local Power Supply needed

• Max power draw: 5.5W.

Memory (Factory

default):

• 128 MB SDRAM

• 256 MB integrated Flash Memory (not upgradeable - factory

programmed)

Certifications: • FCC Part 15 Class B

•CE

• IEC 60950

•RoHS

Panel LCD

Parameters:

• Aspect ratio: 9 x 16

• Minimum brightness (luminance): 280 cd/m2

• Channel transparency: 8-bit Alpha blending

• Contrast ratio: 250:1

• Display colors: 256 thousand colors (18-bit color depth)

• Dot/pixel pitch: 0.14 mm

• Panel type: WQVGA

• Screen resolution: 272 x 480 pixels (HV) @ 60 Hz frame

frequency

• Viewing dimensions: 2.58" x 4.3” (65.2 mm x 109.2 mm)

Active Screen Area: • 4.25” x 2.55” (10.80cm x 6.48cm)

Viewing Angles: • Left/Right/Up/Down: 60/80/80/80

Front Panel

Components:

• Center Button: Capacitive touch button provides both access to

the Setup and Calibration pages and toggles the panel between

a "sleep" or "wake" state. This button is also user-

programmable.

• Capacitive Touch Buttons: four user-programmable buttons, two

each above and below the Center Button.

Center Button

Touch screen

Capacitive

Touch Buttons

Capacitive

Touch Buttons

NXD-435P Specifications (Cont.)

Side Panel

Connectors:

• Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps

communication. The Ethernet port automatically negotiates the

connection speed (10 Mbps or 100 Mbps), and whether to use

half duplex or full duplex mode. Power is supplied through

Power Over Internet (PoE). NXD-435P panels communicate with

the NetLinx Master using the ICSP protocol over Ethernet. LEDs

show communication activity, connections, speeds, and mode

information:

L/A-link/activity - Yellow LED lights On when the Ethernet cables

are connected and terminated correctly and then blinks when

receiving Ethernet data packets.

SPD-speed - Green LED lights On when the connection speed is

100 Mbps and turns Off when the speed is 10 Mbps.

• Mini-USB Connector: 5-pin Mini-USB connector used for

programming, firmware update, and touch panel file transfer

between the PC and the target panel.

Operating /Storage

Environments:

• Operating Temperature: 0° C (32° F) to 40° C (104° F)

• Operating Humidity: 5% - 85% relative humidity

(non-condensing)

• Storage Temperature: -20° C (-4° F) to 60° C (140° F)

• Storage Humidity: 5% - 85% RH

Included

Accessories:

• NXD-435P Installation Guide (93-2262-14)

Other AMX

Equipment:

• CB-TP5i Rough-In/Wallbox (FG038-11)

• Back Cover for the CB-TP5i Rough-In/Wallbox (FG038-12)

• PS-POE-AF PoE Injector (FG423-80)

• CC-USB Type-A to Mini-B 5-wire programming cable

(FG10-5965)

• NXA-RK5 Rack Mount Kit for 5" Wall Mount panels (FG2904-55):

- 5" Rackmount

- Four Screws, #10-32 x.625, PH Truss, BLK

- Four Washers, #10, Black Nylon

- Three Screws, #4-40 x.250, PPH, BLK

FIG. 2 Connector layout on the NXD-435P Modero Wall/Flush Touch Panel

Ethernet 10/100 port

Mini-USB port

Back box

1 2

Résumé du contenu

Page 1 - NXD-435P

Installation GuideNXD-435P 4.3" Modero® Portrait Wall/Flush Mount Touch PanelFor more detailed installation, configuration, programming, file tra

Page 2 - Installation of the NXD-435P

Commentaires sur ces manuels

Pas de commentaire

AMX NXD-435P Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Moniteurs à écran tactile AMX NXD-435P. AMX NXD-435P Installation guide Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Moniteurs à écran tactile AMX NXD-435P